Ultrasonic Flow Monitor/Switch

• Small size for simple installation
• Doppler flow measurement device
• Manual programming
• No need for complicated process connections
• Robust stainless steel construction
• Low cost

The KATflow 10 is a simple Doppler-based flow monitor and switch intended for applications where you need to be sure that flow is maintained at all times.

The KF10 uses an alternative measurement principle to the other instruments in the KATflow range and therefore requires differing application conditions: It is essential that the liquid has entrained solids, gases or turbulences in order to provide a measurement. The accuracy of this device is less than for our flowmeters, however the KF10 is ideal for pump protection or overflow applications.

The unit is very easy to install with minimum configuration required. The KF10 provides both analogue and alarm outputs on the standard model and achieves an uncertainty of < 10%. It can be supplied in configurations for standard and high flows and with certification for hazardous area use.

Applications
• Aerated liquids
• Ash slurries
• Paint
• Paper stock
• Activated sludge